The aerosol ablation process produces nano aluminum nitride, also known as AlN. This method is very pure, has a small particle size and high surface activity. This powder will not be subject to hydrolysis and is extremely low in oxygen. It is easy to see the impact of insulation and thermal conductivity (0.01%). The viscosity can be used in polymer resins. It’s currently the highest thermal conductivity insulation filler.
Features from nano aluminium and nitride
One of the most common nitrides is nano-aluminum. It can resist temperatures as high as 1400 degrees and has a resistance of 1015. It has a significant effect on the thermal conductivity and performance of silicone rubber. It can be used as a thermal shock agent.
The material is strong in resisting molten metal corrosion. It can also be used as a crucible for melting pure iron or aluminum.
The a use of nano aluminum and nitride
1. Manufacturing of integrated circuit substrates for electronic devices, optic devices, radiators, and high-temperaturecrucibles. This allows you to create metal-based or polymer-based composites materials. This material has great potential for use and could replace micron aluminum, which is currently being imported.
2. A thermally conductive silica silica gel, thermally conductive epoxy, resin. The ultra-high thermal conductive silicone gel, made from nano aluminum nitride, has excellent thermal conductivity and electrical insulation. This includes the space between the CPU, the radiator, high power transistors, thyristor component, diodes, heat transfer medium at the contact points with the substrate. To fill in the gaps between IC, triode, or heat sink, nano thermal paste can be used to increase the contact area and enhance heat dissipation.
3. A nano-ceramic protection film and lubricating oil: These nano-lubricating and anti-wear agents are made from modified nano aluminum-nitride ceramics. They act on metal surfaces of friction pairs inside an engine. This protective film acts only on the film’s surface, and it isolates the friction created by relative movement. Nanoceramic particles alter part of friction between friction pairs to change it from sliding friction into rolling friction, like tiny balls. It can reduce friction and friction between moving parts by almost eliminating them. This has a tremendous anti-wear protection impact on your engine. Improved lubrication can lower the friction coefficient to more than 80 percent and enhance the anti-wearability by more over 350%. It also prolongs the service life by more 80%. From 2/10000 up to 1/11,000;
4. High thermal conductivity plastics can be used with modified nano-alum nitride powder. This will greatly increase its thermal conductivity. You can increase the plastic’s thermal conductivity by adding 10% to 30% of an experimental product. The thermal conductivity can also be increased by 10-30%. This material is used primarily in PVC plastics and polyurethane plastics.
5.Use in other applications: Nano aluminium nitride is used in crucibles to smelt non-ferrous and semiconductor metals.
Buffalotours is also known as. Buffalotours Nano Technology Co. Ltd. (aka. We produce aluminum nitride that is high-purity and small in particle size. We are available to assist you if required.