adminWhat’s samarium dioxide powder?
Boisbaudler found a rare earth element within the “praseodymium neonium”, a mineral obtained from the niobium ore. They named it samarium, after this ore.
Samarium is a yellow-colored raw material that is used to make samarium and cobalt magnets. Industrially, Samarium cobalt magnets have been the first to use rare-earth magnetic materials. Permanent magnets can be classified into two groups: SmCo5 or Sm2Co17. SmCo5 series, and Sm2Co17 series were developed in the mid- and late 1970s. Samarium oxide is perfectly safe for use in cobalt magnets. The majority of products can be used for their cost. Additionally, simarium oxide powder has been used in ceramic capacitors as well as catalysts. Additionally, samarium can also be used to create structural materials or shielding materials. It is also able to control nuclear reactors and allow for the safe use of nuclear fission’s enormous amounts of energy.
Preparation for samarium dioxide catalyst
An easy method to prepare steel sulfide/samarium-oxyhydroxide composite photocatalyst
This invention reveals a method of making an indium sulfuride/samarium oxygenoxide composite photocatalyst. The first step is to dissolve the In(NO3)34.5H20 into deionized drinking water. Once the reaction has completed, take the product out and wash it several times in deionized water. Then, add the element molar ratio nIn:ns=1:3. Stir to get the mixed solution A. Next, weigh Sm(NO3)3.6H20 and stir into the mix. It is easy to manage and heat uniformly. There are no miscellaneous phase, high utilization rates, low cost raw materials, and easy availability of the product. These factors effectively increase the photocatalytic activities and stability. They can also be used for degrading organic wastewater pollution.
1. One-step process for creating indium sulfuride/samariumoxyhydroxide composite photoscatalyst. This method is distinguished by the following:
1st Step: First dissolve In(NO3)34.5H20 (deionized) water to prepare a solution. Then weigh thioacetamide according to the element mole ratio nIn.ns=1; and then stir to produce mixed solution A.
Second Step: Weighing Sm(NO3)36H20. Add to mixed solution A according the molar ratio (nIn:nsm=1;(0.40.7). Stir to get the mixed solutions B:
Step 3: Mixture B was put through a homogeneous heat treatment. Once the reaction had completed, the product could be removed and centrifugally washed in deionized and absolute water several times. Finally, it was dried to produce the In2S3/SmOOH composite photographcatalyst.
2. A one-step method for preparing an indium sulfide/samarium oxyhydroxide composite photocatalyst according to claim 1, characterized in that in step 1, 1.145gIn(NO3)3*4.5H20 is added per 30mL of deionized water.
3. Method for creating an indium-sulfide/samarium oxygenoxide composite photocatalyst in one step according to claim 1, where the stirring time at step 2 and 3 is 60 minutes.
4. Method for creating a photocatalyst of steel sulfide/samarium oxide composite according to claim 1 in one step. In particular, in step 3 the mixture B is subject to a homogeneous heat treatment. The mix solution B is then transferred to a hydrothermal kettle and placed in a reactor.
5. Method one for the preparation of an indium/samarium-oxyhydroxide photocatalyst composite according to claim 1. Vacuum drying is used in step three.
6. One-step procedure for creating an indium sulfide/samarium oxide composite photocatalyst, according to claim 5. The drying temperature at step 3 is 60. The drying time is five hours.
Luoyang Trunnano Tech Co., Ltd. is an samarium dioxide powder producer with more than 12 year experience in chemical products development and research. We are happy to assist you in your search for the highest quality samarium powder.
Inquiry us