High Purity Molybdenum Carbide Mo2C Powder CAS 12069-89-5, 99%

Molybdenum carbide powder



Molecular formula of molybdenum carbide

It is

Mo2C

,

Molybdenum carbide


molecular Weight

Its carbon content is 5.89%. The UL is 203.88. It’s a gray-colored metal powder that has a tightly packed hexagonal crystallastic lattice.

Molybdenum carbide


The density

Is 9.18g/cm

Molybdenum carbide


melting point

The number 2690. This new functional material has an excellent melting point, hardness, thermal and mechanical stability and corrosion resistance. It is widely used to resist high temperatures, chemical corrosion and wear.


Mo carbide

Has a hexagonal crystal arrangement, a= 0.30029nm; c= 0.472895nm. Micro Vickers hardness (load 50g), 1950kg/mm2 (compared 2080kg of WC). (mm2 is harder) The melting point for Molybdenum Carbide Mo2C Powder is 2687. If you are interested in purchasing Molybdenum Carbide Mo2C Pulver bulk, please send us an inquiry.

Molybdenum Carbide Mo2C Pulver:


Molybdenum carbid CAS 12069-89-5, is a grey hexagonal crystal. The characteristics include a high melting temperature and hardness as well as good thermal and mechanical stability. It is also resistant to corrosion. Its melting point is 2692degC. It is not soluble in water or alkaline liquids, but it can be slightly soluble in hydrofluoric acid, sulfuric and nitric acids.

Formula molecular: Mo2C

CAS Code: 12069-95-8

Property and appearance of:gray metal powder

Melting point: 2690

Density: 5.89g/cm3

Technical Parameter MolybdenumCarbide Mo2C Pulp

:

Chemical Composition	Mo+C	C	All C	S	O	Fe
Test result (%)	99	11.3	0.2	0.02	0.4	0.12

It is simple.


Molybdenum Carbide Mo2C Mo Powder


produced?


1. The molybdenum-carbide powder is generally made using the following methods: molybdenum-carbon direct chemical method; metal oxide and reduction-chemical method; vapor deposition technique and self-propagating, high-temperature synthesis.

2. After they have thoroughly mixed the molybdenum and carbon black, they can be ground using a ballmill and then pressed into desired shapes. A hydrogen gas stream is used to calcinate the product at 1350-1500 degrees C. The calcined product then is cool, crushed, and finally ground. Molybdenum trioxide and molybdenum dioxide can be used in place of the molybdenum reduction method.

3. The use of an auxiliary bath for metal.

Use cobalt to make a metal bath. Heat it using a Taman furnace with hydrogen stream at 1800degC. After cooling, heat in a pure graphitecrucible at 1800degC for 1h. Once it has cooled, cool the product with the Taman furnace at 1800degC. Keep it at 1800degC for 23h. Cool to room temperature (2h), then crush it. Treat it with warm hydrochloric Acid to remove cobalt.

4. Produced through the carbonization metallic molybdenum.

Molybdenum oxide MoO3 is then hydrogenated and reduced into molybdenum. Next, the molybdenum-carbon black mixture [Mo934% (mass),C6.6%(mass)] can be dried-mixed using a ballmill for around 10 hours. Finally, it is molded under 1t/cm pressure. Place the pressure-treated material block in a graphite crucible. Then heat the mixture to 14001500 with pure hydrogen at a temperature of about -35 using a Taman furnace, or induction heating furnace. Keep it at that temperature for around 1h. Mo2C can be made by carbonizing molybdenum.

5. Synthetic methods.

The molybdenum and carbon black are mixed together in a bowl. They then grind the mixture for an hour using a ballmill. Once it has cooled, it is pressurized into granules, which can be used to heat up the product. The product is obtained by hydrogen gas flow calcining for one hour at 1350-1500degC. Next, the product must be cooled, then pulverized, and finally ground in a ball mill. You can use molybdenum oxide or molybdenum bioxide instead of molybdenum pulverized powder to reduce the molybdenum carbonide.

Applicaciones


Molybdenum Carbide Mo2C Pulp:


Molybdenum carbide is an innovative functional material that has high melting points, hardness, excellent anti-corrosion and other properties. This material has been extensively used in a variety of high temperature, chemical and abrasion corrosion areas. The electronic structure of the noble metal and its catalytic properties are similar.

1. Because of its unique electronic structure and catalytic properties, molybdenum caride can be used widely as a catalyst in reactions involving hydrogens such as hydrodesulfurization or denitrification.

2. Molybdenum carbide is an important component of molybdenum-molybdenum carbide hard coatings and other cermet coatings, and can also be used alone as a wear-resistant and wear-resistant coating;

2. Molybdenum-carbide is widely used in hydrogen related reactions like alkanes.

3. To make engineering ceramics, chromium free special alloys or molybdenum caride can be made.

4. Molybdenum carbid is used in super-hard material, wear resistance material, heating element material, and high temperature structural material.

5. To make wear-resistant films or semiconductor films, Molybdenum Carbide is used.

6. For chromium-free engineering ceramics, molybdenum caride can be used.

Molybdenum Carbide Mo2C Pulver Storage

:

Molybdenum Carbide Mo2C Dust should not be exposed to the air. Damp reunion can affect Mo2C powder’s dispersion performance. Additionally, Mo2C Powder should not be exposed to stress.

Molybdenum Carbide Mo2C Pulver Packing & Shipping

:

We offer many packing options that are dependent on the Molybdenum-Carbide Mo2C Powder amount.

Molybdenum Carbide Mo2C Mo2C Powder packaging: vacuum packing 100g, 500g and 1kg/bag at 25kg/barrel. Or as you request

Molybdenum Carbide Mo2C Mo2C Powder Shipping: Shipments can be made by sea or air as soon as the payment is received.

Buffalotours Nano Technology Co. Ltd. (Buffalotours), is a global trusted supplier and manufacturer that produces super high-quality chemical and Nanomaterials.

Send us an enquiry if you’re looking for mo carbide powder of high quality. (brad@ihpa.net)

Buffalotours Nano Technology Co. Ltd. (Buffalotours), is a global trusted supplier and manufacturer that produces super high-quality chemical materials.

Send us an enquiry if you’re looking for Mo2C powder of high quality. (brad@ihpa.net)