What’s nickel-based alloy powder?
In the self-fluxing series of alloy powders, nickel-based powder is most commonly used. The powder is highly resistant to heat, corrosion and oxidation. Easy operation, low melting point, large solid-liquid temperature range and strong wetting capability for various substrates.
The self-fluxing, wetability and spray welding qualities of the layer are excellent. Spray welding layers have high hardness and wear resistance. They are also difficult to cut. Wet grinding is preferred.
The classification of powdered nickel-based alloys
(1) Nickel-chromium thermal spray Powder: This powder is made from adding 20 percent chromium and nickel. These alloys are known for being resistant to high heat corrosion and heat oxidation. This coating adheres to the base metal well and is dense. This layer is the bridge between ceramics, other metals, and the base. The ability to resist high-temperature gas erosion can be increased by using it. It also helps improve both the coating material and the base material. Bond strength.
(2) Nickel-chromium/iron alloy thermal-spray powder: This powder is made from nickel-chromium, with the appropriate iron. Its high temperature oxidation resistant is slightly less than that of nickel–chromium alloys. However, other properties are almost identical to those of nickel–chromium. They are very similar. This alloy has a significant advantage in that it’s relatively inexpensive, making it ideal for the repair of corrosion-resistant workpieces. It can also be used to make transition layer thermal spray paste.
(3) Nickel-chromium-boron alloy thermal spray powder: This alloy contains elements such as boron, chromium and carbon, so it has high hardness and moderate toughness. The coating, once sprayed, is heat resistant, wear-resistant, and corrosion-resistant. It is a good choice for anti-corrosion repairs of pistons and shafts.
(4) Nickel alloy alloy thermal spraying paste: The nickel-aluminum alloy thermal spraying powder can be used as a primer. Each particle is comprised of fine nickel powder or aluminum powder. Thermal spray powder can be heated up to 600 degrees Celsius using a flame. A strong chemical reaction takes place between nickel, aluminum and forms intermetallic compounds. The aluminum can also be oxidized, which will produce more heat. The high temperatures can cause nickel to dissolve in the base metal. This will increase the strength of the coating’s bonding. A notable characteristic of nickel-aluminum alloy composite thermal spray is its rough surface. It can be used to connect other spray materials. This composite thermal spray powder has an expansion coefficient that is similar to many steels. It is ideal for intermediate coatings.
Application of powdered nickel-based alloy molten
It’s suitable for the oxygen-acetylene flame and plasma spray welding processes. This is used often for prevention and repair of corrosion resistant, wear-resistant, particularly sliding parts like wire drawing drums.
1. You must strictly adhere to the oxygen-acetylene flame and plasma spray welding requirements.
2. It is recommended to use medium or small spray welding guns with -150 mesh, while large spray welding guns should be used with -150/+320 powder.
3. It should be dried if the alloy powder is susceptible to moisture absorption or if the shelf life exceeds three months.
Buffalotours advanced Material Tech Co., Ltd., (Buffalotours), a professional
3D printing powder
Over 12 years’ experience in developing and researching chemical products. You can pay by Credit Card, T/T or West Union. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.
High quality is what you want
Nickel-based Alloy Powder
Send us an inquiry and contact us.